Laurell Technologies Corporation
26 April 2024
 

Injectors.

Laurell Injectors
 
  • For precise chemical flow control
  • Many types of spray heads available
  • Contact the factory with your custom requirement

Fan Spray Injector
(Assembly P/N 1004 0154 shown):


(spray head shown: standard P/N 6200 0090)

 Spray head P/N 6200 0090 Flow data
(standard spray head)
Operating Pressure (PSIG) Flow Rate
(g / min)		 Flow Rate
(l / min)		 Spray
Angle
5 .05 .19  
10 .068 .258 21°
15 .083 .315  
20 .095 .36 41°
30 .118 .447 49°
35 .125 .48  
40 .13 .51 55°

Spray head P/N 6200 0038 Flow data
(higher flow, wider pattern - screw-in replacement)
Operating Pressure (PSIG) Flow Rate
(g / min)		 Flow Rate
(l / min)		 Spray
Angle
5 .163 .618  
10 .233 .883 90°
15 .278 1.054  
20 .314 1.19 99°
30 .383 1.452 102°
35 .417 1.58  
40 .463 1.75 104°
Laurell Injector Spray Fan
click to enlarge

Higher Flow Flood Injector
 (custom orifice sizes also available):


 Flow data
Part No. /
Orifice		 5 PSIG /
Flow Rate
(l / min)		 10 PSIG /
Flow Rate
(l / min)		 15 PSIG /
Flow Rate
(l / min)
1001 0221 / 0.125" (3 mm) 1.27 1.93 2.51
1001 0226 / 0.087" (2.2 mm) 0.86 1.39 1.85
1001 0227 / 0.062" (1.6 mm) 0.52 0.78 1.02
Laurell Injector Flood
click to enlarge

Laurell Nozzle Flow Rates
Flow Chart

Lower Flow Fan Spray Injector
(assembly P/N 1004 0904 shown):
NOTE: material being dispensed must be compatible
with 316 series Stainless Steel


Flow data
Operating Pressure (PSIG) Flow Rate
(g / min)		 Flow Rate
(l / min)		 Spray
Angle
20 0.02 0.075 47°
30 0.03 0.11 65°
40 0.03 0.11 <75°
60 0.04 0.15 <75°
 

Retractable Resist Injector


  

EBR Injector