Laurell Technologies Corporation
11 April 2021
 

Replacement Parts

All kits are fully tested, include all parts, special tools, comprehensive installation instructions and limited phone support.

REPLACEMENT PARTS ONLY—NOT FOR UPGRADING—unless so noted! MODEL, S/N & original maximum RPM MUST BE SUPPLIED on your order
Note: if you give us a higher speed than the original it will not work.

Updated List

1009 0058 WS-400x Keypad

1009 0059 WS-400x LCD

1009 0060 WS-400B/E & -650x Pneumatic Vacuum Valve

1009 0061 WS-400x/-650s Power Conditioner (220 to 110 VAC)

1009 0062 WS-400x/-650x Lid Sensor

1009 0132 RD-100 Repair kit contains keypad, control board and 1' RJ45 cable

1009 0063 WS-400x/-650s, RD-100 Standard Performance Motor Ass'y Tabletop must specify segments of encoder 30 (2004 & before) or 60 (>2004 to 2010)

1009 0066 WS-400x/-650s Standard Performance Motor Ass'y Indeck must specify segments of encoder 30 (2004 & before) or 60 (>2004 to 2010)

1009 0064 WS-400x/-650s, RD-100 Standard Performance Motor Controller (must specify present maximum RPM [3K, 6K, 8K, 10K])

1009 0109 WS-400Bz/-650Sz Standard Performance Motor Controller >2008

1009 0110 IV-PVG Integrated Variable Pneumatic Vacuum Generator (can be used to upgrade most Laurell spin processors with a pneumatic vacuum control valve)

1009 0071 WS-400x HPD High Performance Motor Ass'y - Tabletop

1009 0072 WS-400x HPD High Performance Motor Ass'y - Indeck

1009 0073 WS-400x/-650 HPD-2A High Performance Motor Ass'y (34) - Tabletop (Cup & Cone vacuum seal - superseded by HPD-B)

1009 0074 WS-400x/-650 HPD-2A High Performance Motor Ass'y (34) - Indeck (Cup & Cone vacuum seal - superseded by HPD-B)

1009 0075 WS-400x/-650 HPD-2B High Performance Motor Ass'y (34) - Tabletop

1009 0076 WS-400x/-650 HPD-2B High Performance Motor Ass'y (34) - Indeck

1009 0096 WS-400x/-650 HPD-2C High Performance Motor Ass'y (23) - Tabletop

1009 0097 WS-400x/-650 HPD-2C High Performance Motor Ass'y (23) - Indeck

1009 0078 WS-400x/-650 HPD-2 Brushless Motor Amplifier w/firmware

1009 0079 WS-400x/-650x Power Supply 5 & 24 VDC

1009 0065 WS-400x & -650s Seal Purge Pressure Sensor

1009 0067 WS-400A 24 VDC Vacuum Control Valve

1009 0081 Injector assembly (used on EDC systems {6, 8, 23 sizes}standard fan spray)

1009 0082 1/4" Teflon control valve (as mounted on EDC manifold-Chemical)

1009 0083 3/8" Teflon control valve (as mounted on EDC manifold-Diffuser)

1009 0084 1/4" flare tool

1009 0085 3/8" flare tool

1009 0086 1" flare tool

1009 0087 100 feet (30.5 meters) of Teflon tubing

TBD UD-3 Universal Dispenser all chemicals - syringe input version (with FFKM O-rings)

TBD UD-3b Universal Dispenser all chemicals - syringe input version (with FFKM O-rings)

O-Ring Kits

1. Replacement Parts
1. WS-200 series
2. WS-400 / EDC-100 series
3. WS-400
4. WS-500 - HPD / EDC-100 — HPD
5. RD-100
6. WS-400 - HPD-2
7. 650 / 650Hz
8. 650Sx
9. 650Sz
2. Retrofit Kits - for upgrading
3. Consumables
1. O-Rings
2. Syringes
3. Needles
4. Miscellaneous

NOTE: We always recommend returning systems to the factory for firmware and other design updates, as well as for a complete analysis and repair. Because of the high likelihood of damaging these replacement parts by non-factory trained personnel there will be no returns except with entire system return/repair per our standard RMA procedure.